Flask Accessories
Ace Glass, Inc. Head, 6in, four neck, 24/40 center, (3)24/40
6 inch reaction head with a flat ground flange for use with all reaction flasks that have a 150mm (6 inch) Duran ground mating flange. Head has four necks: (1) 24/40 center, (3) 24/40 sides.
Bellco Glass, Inc. MicroCarrier Impeller Assembly , 100-250mL
Micro-Carrier ImpellerAssemblyPromote optimal growth of suspension andmicro-carrier cultures. Impeller height adjuststhrough compression fitting in cap. Indentedbottom up to 1L prevents accumulation ofmicro-carrier beads under impeller.. Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. MADE IN THE USA. Impeller size: 100-250ml Paddle dimensions: 1" x 2"
Bellco Glass, Inc. Stainless Steel Probe CapSeal, 3L W/PTFE IOB, 4 Ports
The stainless steel 100mm IOB probe cap seal is manufactured from 316L stainless steel and has a red-silicone sealing gasket with a 100mm blue polypropylene screw cap. The stainless steel probe cap seal has four accessory ports surrounding a centrally located internal impeller assembly. Two of these ports have a white silicone plug inside a threaded cap that acts as a compression fitting for probe insertion. The other ports accept accessories using the same silicone compression plugs and threaded caps. These compression plugs make it easy to adjust the insertion length of probes or straight tubes depending upon the working volume of the bioreactor flask. The stainless steel cap seal, stainless steel PTFE impeller and all fittings are steam autoclavable. MADE IN THE USA.
Ace Glass, Inc. Head, 24/40 center, (2)24/40 sides, (1)10/30, 137mm OD x 100mm ID flat flange
4 neck, flat-flange head for use with 1-4L cylindrical reaction flasks. Supplied with 24/40 reinforced outer center neck, and (2) 24/40 reinforced outer joints in-line, and a 10/30 reinforced outer side joint for thermometer. 137mm O.D. x 100mm I.D. flat flange.
Enterprise Technology Solutions USB-C Multimedia Adapter
USB-C Multimedia Adapter HDMI/Ethernet/USB-A/USB-C/VGA 4 33 Black
Ace Glass, Inc. Head, 100mm(4in), five neck, 29/42 center, (4)24/40
Head, 100mm(4in), five neck, 29/42 center, (4)24/40
Chemglass Life Sciences 2-Port Angled Vent Assembly, GL-32, Universal, 316L Electro Polished Stainless Steel, 3/16" OD Hose Barbs, Complete with Gasket and Cap
Universal vent port assembly is constructed of 316L electro polished stainless steel.These port assemblies fit all types of spinner flasks, media bottles and vessels.Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes.Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.
Cole-Parmer Idex Flangeless Fitting, Standard Knurl, Natural PEEK, 1/8" OD Tubing, 1/4-28 Flat-Bottom; 10/PK
Just slip the nut and ferrule over the tubing and finger tighten the assembly into your receiving port. Unlike the time required to flange tubing, it only takes a few seconds to change the components.
Chemglass Life Sciences Internal Stirring Assembly for 3, 000mL BioProcess Spinner Flasks
Internal Stirring Assembly for 100mL BioProcess Spinner.Flasks
Thomson Instrument Company Optimum Growth 250mL 8 Position Carrier
Designed for use with the Optimum Growth 250 mL Flask (P/N: 931111), this sturdy carrier allows for the easy and efficient transport of up to 8 flasks at once. Ideal for streamlining workflow in lab environments, it ensures secure handling while minimizing the risk of spills or breakage during transfer. Made in the USA
Ace Glass, Inc. Head, 150mm Duran flange, 5 neck, 45/50 center, (3)24/29, (1)45/40
5 neck head with 150mm flat ground Duran flange. Head features one 45/50 center neck, three 24/29 side necks, and one 45/40 side neck.
Chemglass Life Sciences 3-Port SST Thermowell Assy for 6L Spinner Flasks
Our hose barbed 3-port large diameter thermowell assemblies are designed to accommodate a wide variety of RTD's and dial thermometers of different diameters for measuring the process temperature inAngled Side Arm (ASA) Spinner Flasks.All 316L stainless steel tubes have an electropolished finish to a Ra 20u (or better).These assemblies feature a thermowell tube with 0. 375" OD and a 0. 305" ID that will accept all 1/4" thermometer probes.The assemblies include a blue PP open top GL-45 cap with white silicone gasket.
Ace Glass, Inc. Complete 24/40 10mm bearing, straight adapter style
24/40 10mm straight-adapter style bearing includes all parts needed. Self-aligning, lubricant free PTFE Trubore bearing is designed for use with 10mm O.D. stainless steel or polished glass shafts.
Chemglass Life Sciences 2-Port Assembly, 15000mL Spinner Flask
Port assemblies are constructed of 316L electro-polished stainless steel.These port assemblies fit all types of spinner flasks.The assemblies consist of a siphon and vent tube.Supplied complete with a GL-45 open top cap and silicone gasket.